INCOLOY 825 (UNS N08825 / NS142)
Kopo
Alloy 825 ke motsoako oa nickel-iron-chromium oa austenitic hape o hlalosoang ke litlatsetso tsa molybdenum, koporo le titanium. E ile ea ntlafatsoa ho fana ka khanyetso e ikhethang tikolohong e mengata e senyang, ka bobeli oxidizing le ho fokotsa.
Alloy 825 e ile ea ntlafatsoa ho fana ka khanyetso e ikhethang libakeng tse ngata tse senyang, tse etsang oxidizing le ho fokotsa. Ka mefuta ea nickel e pakeng tsa 38% -46%, sehlopha sena se bonts'a khanyetso e matla ea khatello ea maikutlo (SCC) e bakoang ke chloride le alkalis. Likahare tsa nickel li lekane bakeng sa ho hanyetsa chloride-ion stress-corrosion cracking. Nickel, mmoho le molybdenum le koporo, e boetse e fana ka khanyetso e ikhethang ho fokotsa maemo a kang a nang le sulfuric le phosphoric acid.
Likahare tsa chromium le molybdenum li boetse li fana ka khanyetso e ntle ea likoti libakeng tsohle ntle le litharollo tse matla tsa oxidizing chloride. E sebelisoa e le lisebelisoa tse sebetsang libakeng tse fapaneng tse fapaneng tsa ts'ebetso, alloy 825 e boloka thepa e ntle ea mochini ho tloha mocheso oa cryogenic ho fihla ho 1,000 ° F.
Ho eketsoa ha titanium ho tsitsisa Alloy 825 khahlano le ts'usumetso e maemong a sosobaneng e etsa hore motsoako o se ke oa hlola o hlaseloa ke li-intergranular ka mor'a ho pepesehela mocheso ka mefuta e fapaneng e ka susumetsang litšepe tse sa tsitsang. Ho etsoa ha Alloy 825 ho tloaelehile ka li-alloys tse nang le nickel-base, tse nang le thepa e ka etsoang habonolo le ho cheseha ka mekhoa e fapaneng.
Sesebelisoa sena se na le sebopeho se setle haholo, se tloaelehileng sa li-alloys tsa nickel-base, tse lumellang thepa hore e kobehe ho radii e nyane haholo. Annealing ka mor'a ho kobeha ha ho hlokahale hangata.
E tšoana le alloy 800 empa e ntlafalitse ho hanyetsa ho bola ha metsi. E na le khanyetso e ntle ho li-acid tse fokotsang le ho oxidizing, ho phatloha ha khatello ea maikutlo, le tlhaselo ea sebakeng se kang pitting le crevice corrosion. Alloy 825 e hanyetsana haholo le sulfuric le phosphoric acid. Alloy ena ea tšepe ea nickel e sebelisetsoa ho lokisa lik'hemik'hale, lisebelisoa tsa taolo ea tšilafalo, lipeipi tsa oli le khase, ho lokisa mafura a nyutlelie, tlhahiso ea asiti le lisebelisoa tsa ho kha.
Litlhaloso tsa Sehlahisoa
ASTM B163, ASTM B423 , ASTM B704
Litlhoko tsa Lik'hemik'hale
Alloy 825 (UNS N08825)
Moetso %
| Ni Nickel | Cu Koporo | Mo Molybdenum | Fe Tšepe | Mn Manganese | C Khabone | Si Silicone | S Sebabole | Cr Chromium | Al Aluminium | Ti Titanium | |
| 38.0-46.0 | 1.5-3.0 | 2.5-3.5 | 22.0 mets | 1.0 boholo | 0.05 max | 0.5 boholo | 0.03 boholo | 19.5-23,5 | 0.2 boholo | 0.6-1.2 | |
| Thepa ea Mechini | |
| Kotulo Matla | 35 Ksi mets |
| Matla a tšepe | 85 Ksi mets |
| Elongation(2" mets) | 30% |
| Hardness(Rockwell B Scale) | 90 HRB max |
Mamello ea Boholo
| OD | OD Toleracne | Mamello ea WT |
| Intshi | mm | % |
| 1/8" | +0.08/-0 | +/-10 |
| 1/4" | +/-0.10 | +/-10 |
| Ho fihla ho 1/2" | +/-0.13 | +/-15 |
| 1/2" ho isa ho 1-1/2" , ho kenyelletsa | +/-0.13 | +/-10 |
| 1-1/2" ho isa ho 3-1/2" , ho kenyelletsa | +/-0.25 | +/-10 |
| Tlhokomeliso: Ho mamellana ho ka buisanoa ho latela litlhoko tse khethehileng tsa moreki | ||
| Khatello e phahameng e lumelletsoeng(yuniti: BAR) | ||||||||
| Botenya ba Lebota(mm) | ||||||||
| 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.96 | 4.78 | ||
| OD(mm) | 6.35 | 451 | 656 | 898 | 1161 | |||
| 9.53 | 290 | 416 | 573 | 754 | 1013 | |||
| 12.7 | 214 | 304 | 415 | 546 | 742 | |||
| 19.05 | 198 | 267 | 349 | 470 | ||||
| 25.4 | 147 | 197 | 256 | 343 | 509 | 630 | ||
| 31.8 | 116 | 156 | 202 | 269 | 396 | 488 | ||
| 38.1 | 129 | 167 | 222 | 325 | 399 | |||
| 50.8 | 96 | 124 | 164 | 239 | 292 | |||
Setifikeiti sa Tlotlo
ISO9001/2015 Standard
ISO 45001/2018 Standard
Setifikeiti sa PED
Setifikeiti sa tlhahlobo ea TUV Hydrogen e lumellana
| Che. | Boholo(mm) | |
| OD | Thk | |
| BA Tube Inner surface roughness Ra0.35 | ||
| 1/4″ | 6.35 | 0.89 |
| 6.35 | 1.00 | |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 1/2” | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 3/4” | 19.05 | 1.65 |
| 1 | 25.40 | 1.65 |
| BA Tube Inner surface roughness Ra0.6 | ||
| 1/8″ | 3.175 | 0.71 |
| 1/4″ | 6.35 | 0.89 |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 9.53 | 3.18 | |
| 1/2″ | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 5/8″ | 15.88 | 1.24 |
| 15.88 | 1.65 | |
| 3/4″ | 19.05 | 1.24 |
| 19.05 | 1.65 | |
| 19.05 | 2.11 | |
| 1″ | 25.40 | 1.24 |
| 25.40 | 1.65 | |
| 25.40 | 2.11 | |
| 1-1/4″ | 31.75 | 1.65 |
| 1-1/2″ | 38.10 | 1.65 |
| 2″ | 50.80 | 1.65 |
| 10A | 17.30 | 1.20 |
| 15A | 21.70 | 1.65 |
| 20A | 27.20 | 1.65 |
| 25A | 34.00 | 1.65 |
| 32A | 42.70 | 1.65 |
| 40A | 48.60 | 1.65 |
| 50A | 60.50 | 1.65 |
| 8.00 | 1.00 | |
| 8.00 | 1.50 | |
| 10.00 | 1.00 | |
| 10.00 | 1.50 | |
| 10.00 | 2.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |
| 12.00 | 2.00 | |
| 14.00 | 1.00 | |
| 14.00 | 1.50 | |
| 14.00 | 2.00 | |
| 15.00 | 1.00 | |
| 15.00 | 1.50 | |
| 15.00 | 2.00 | |
| 16.00 | 1.00 | |
| 16.00 | 1.50 | |
| 16.00 | 2.00 | |
| 18.00 | 1.00 | |
| 18.00 | 1.50 | |
| 18.00 | 2.00 | |
| 19.00 | 1.50 | |
| 19.00 | 2.00 | |
| 20.00 | 1.50 | |
| 20.00 | 2.00 | |
| 22.00 | 1.50 | |
| 22.00 | 2.00 | |
| 25.00 | 2.00 | |
| 28.00 | 1.50 | |
| BA Tube, Ha ho kopo mabapi le bokahare ba bokaholimo bo ka hare | ||
| 1/4″ | 6.35 | 0.89 |
| 6.35 | 1.24 | |
| 6.35 | 1.65 | |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 1/2″ | 12.70 | 0.89 |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 6.00 | 1.00 | |
| 8.00 | 1.00 | |
| 10.00 | 1.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |